How to Copy a Clip in Timeline and Paste It Again

Adobe Premiere Pro CC 2019

Premiere Pro is a pop video editing software by Adobe that works on both Windows and on Apple computers. It is comparable to Apple's Concluding Cut Pro video editing plan, only has become the program of choice for many video producers.

Premiere Pro is a not-destructive editing software, which means aught you do in the program tin change or overwrite your media files. That said it's always good to go on a backup of your projection and media files. Premier Pro is taught in three of our workshops. For a easily-on video editing feel join Premiere Pro for Intermediate Video Editors or Advanced Video Editing.

Creating a New Project

Each video you create in Premiere should start past creating a new projection.

The projection file will save all your edits and changes yous've fabricated. It'southward saved as a separate .prproj file that can be opened only with Premiere Pro.

The project file volition contain references to the different media files yous utilize to build your movie and the sequences on which yous suit your video clips, add audio tracks, transitions, titles, etc.

When you launch Adobe Premiere Pro, a new window will announced. Click the New Projection push, located on the left side of the window.

This will open a new window where y'all tin can define the basic settings of your project, including the filename and location where the projection file volition exist saved.

In the New Projection dialog box, ​ Name ​is what you lot'll telephone call the project file, and Location ​ is where the project will be created.

When working in Premiere, it'south best to keep both your footage and projection file together on an external difficult drive. So on your external hard drive, make a new folder for your projection, and use ​ Browse ​ to save your project file in that new folder.

You shouldn't need to modify any of the other settings on this page, but before you lot click OK , you should check the Scratch Deejay settings.

Setting the Scratch Disks

Click on the ​ Scratch Disks ​ tab at the top of the New Project dialog box.

The scratch deejay is the location on your computer where Premiere Pro CC 2019 will shop media and other files related to your project.

By default the Scratch Disk will be fix to the same folder that you fix as the location for your new projection. Nosotros recommend setting information technology to the same location, unless you have multiple difficult drives.

IF YOU ARE WORKING ON A Estimator WITH 3 OR MORE Hard DRIVES then yous tin improve performance by setting "video previews" and "audio previews" to that third bulldoze. If you but have 1 or 2 drives (your computer, and an external difficult drive), you tin ignore this, but for the curious, the ideal disk setup according to Adobe is as follows.

After scratch disks, you tin check out the Ingest Settings. We won't change any of these settings correct now, but we'll come dorsum to them later when we beginning importing our media files. All of these settings can be changed afterward yous've started your project as well, if needed.

After verifying the ingest settings, click OK ​.

Editing Workspace

After you lot create a new project or re-open an existing project, the primary workspace for Adobe Premiere will open on your screen. Information technology is divided into four sections or panes:

• Workspaces – ​This bar at the meridian shows the different workspaces bachelor in Premiere. A workspace is only a preset for how the different panes are arranged. By default, Premiere should open up in the ​ Editing workspace. This is the workspace we will be focusing on. If y'all ever accidentally shut or can't find a window, right click the three horizontal lines next to Editing in the top bar, and click Reset to Saved Layout.
• Project ​ – This shows the media files you have imported into your project, as well as your sequences. Inside this window, there are too a number of tabs yous tin navigate through to access your media more hands. 2 of the main tabs nosotros will exist using are Media Browser, and Effects. Media Browser shows files on your figurer or external hard drive that you can import into Premiere. Effects contains different filters and transitions you can use when editing your video.
• Source ​ – The Source pane is used to preview video clips selected from the project window. Double click a video file from the Project pane to view it in the Source pane. You can drag and drib video files from the Source or Project pane into the Timeline to begin editing. Ane of the main tabs inside the Source pane is Outcome Controls, where you can adjust effects you've added to your source video.
• Timeline ​ – This is where y'all get together your clips in a sequence, along with transitions, text boxes, audio tracks, etc. Until you create a sequence, this department will exist blank. The default position is the lower correct of the screen.
• Program – This pane is where you lot can see a preview of the sequence you accept open in the Timeline. This is the preview of your edit in progress.

To change the layout of your workspace panes, click the Window button in the vertical bar at the top of the screen. 'Workspaces' should be the beginning selection in the menu. Hover over information technology to display the available pre-selected workspace panes, and select whichever y'all prefer. Nosotros recommend using the ​ Editing ​layout.

Whatsoever panel can exist resized by clicking and dragging at the margins between panes, or moved around the screen past clicking and dragging on the name of the pane.

Preferences

You can modify a number of setting preferences in Premiere, such every bit doing more than frequent automatic saves of your project or changing the default settings for how audio from your camera is converted into dissimilar types of audio tracks in Premiere.

To change the preferences on a Mac, in the horizontal menu at the top select ​ Premiere Pro > Preferences ​ and select the setting you want to change.

On a PC, the aforementioned bill of fare is available from ​ Edit > Preferences

Auto Relieve

We recommend adjusting your Car Save preferences to Automatically Save Every 5 minutes.

To exercise this, select Premiere Pro from the horizontal menu at the top of the screen. Hover over Preferences , and click Auto Save ​ from the drop-down menu.

Make sure you have selected the checkbox adjacent to Automatically save projects .

In the text field side by side to Automatically Save Every: enter 5 minutes.

In the text field next to Maximum Project Versions: enter 100.

This volition automatically save your project more ofttimes, and keep a longer record of old versions of your project.

You can choose where Premiere Pro CC 2019 will store your auto saved files by setting your Scratch Disks. Hover over File in the horizontal bill of fare at the height of the screen, go to Project Settings and click Scratch Disks . A new window chosen Project Settings will announced. Under Project Auto Salve , you tin can choose where the motorcar saved files will be stored.

Copying Video Photographic camera Files

Earlier we edit video you've shot, we need to copy it from your camera's memory card to the computer or external hard drive.

The easiest way to do this is to connect your memory menu to your estimator using a carte du jour reader, and drag and drop the contents into a binder that will contain both your projection file and video files onto the computer or external hard drive.

Important notation ​: It's best to drag the entire contents of the card onto your computer. DSLR cameras like Canon and Nikon may take private .mp4 files that y'all can copy one by one, but for many cameras, especially from Panasonic and Sony you need to drag the unabridged folder on the carte du jour. This folder is probably called "Individual" and will contain some other folder called AVCHD or XAVC the video files. It'south important to continue these folders together because they as well contain related files such as metadata files that Premiere will need to open the videos. Yous should not edit the AVCHD folder or any files within this folder, or y'all risk corrupting the video footage.

Copying your footage to your computer or external hard drive will make the video files accessible to Premiere for import via the Media Browser, and allow you eject the retention bill of fare without breaking Premiere'south connection to the video files.

Importing

Information technology is necessary to import your media into Premiere so you can begin editing.

Click File > Import from the horizontal menu at the top of the screen. A finder window will open, and you can select the folder or private files you want to import.

You can likewise use the ​ Media Browser ​pane in the lower left side of the editing workspace to navigate your computer and select media to import. The Media Browser functions similarly to Finder or Explorer, but is built into Premiere. You can view the files that are available on your computer or external hard bulldoze and import them into Premiere.

You'll see the file directory for your hard drive displayed on the left. Navigate to the binder that has a file you want to use in your movie, and you'll see the file displayed on the right. Video files will appear every bit icons showing the outset scene from the clip.

Brand sure yous click the ​ icon view ​ button at the bottom of the Media Browser to brandish your video and photos every bit icons. You tin also adjust the slider at the bottom to increase the size of the icons, and click on the three horizontal lines to sort by name, filetype, etc.

Yous tin preview a clip to make sure it's one yous want to import by selecting the prune and using the small scrubber bar to scan through the clip.

Press the tilde cardinal ( ​ ~ ​ ) on the keyboard while the Media Browser is selected to view this project pane in fullscreen view. This, in conjunction with zooming on thumbnail view, offers an easy way to scrub through your videos and preview your clips.

Double click on a file to preview it in the Source pane, located straight above the Project pane. This does not import the file, but allows you lot to play the prune, and scrub through it in a larger view.

To import a file, correct-click on a file and select ​ Import ​ from the drop-downwardly carte du jour. Premiere Pro CC 2019 volition import the file and it will announced in the Project pane.

Ingesting

Yous can likewise copy files from a media card to your computer and import them into Premiere in one activeness using the Media Browser. This will re-create media from your menu to your calculator, and import all at once. Adobe Media Encoder must be installed to import files this way.

To offset, in the top bar of the Media Browser, select the checkbox labeled Ingest .

Then click the wrench next to the Ingest checkbox to verify your settings. The Project Settings window will open up to the tab called Ingest Settings.

Copy ​: means that a re-create of the files will be made.

Preset: ​MD5 verification is a fancy mode of saying Premiere will double bank check to make sure everything copied without errors.

Principal Destination: Defines the location where the files will be copied. By default, the files will be placed in the same folder as your project file.

Click OK to save your settings.

Navigate to locate your card using the Media Browser tab. Your media carte du jour should be under Local Drives. You tin toggle the arrow to observe the specific card you want to import files from. Right click on the file or folder you wish to import, and select Import from the menu options. The media files will be copied from the bill of fare to your project file, and imported into your projection.

Another program called Adobe Media Encoder will open and prove you a progress bar as the files are existence copied, simply you lot tin can ignore this and start editing immediately.

Undoing changes

If you make a mistake while editing your video yous can use Premiere'due south Undo function to return to before versions of your projection.

There are multiple means to utilise the Undo function. Navigate to the horizontal menu bar at the superlative of the folio, right click Edit and select Disengage from the menu.

Alternatively, if you are using a Mac, you can use a keyboard shortcut and simultaneously press Command + Z . If yous are using a PC, press CTRL + Z .

Previewing Your Clips

In order to edit the footage you imported, navigate out of the Media Browser, to the Project tab in the Project pane.

Double check that you are working in the Projection pane and not the Media Browser. Clips in either window can be previewed in similar ways (similar scrubbing through the footage), only it's simply the Project pane that shows you the imported media that's ready to edit.

Yous tin can modify how you view your footage- in a listing or as icons you can scrub through -past selecting betwixt 2 buttons in the lesser left of the Project pane. You can view clips in the Source pane for a larger preview. Double click on a clip, or click and drag it onto the source monitor to preview.

Once a prune has been loaded in the Source pane, you can employ the buttons on the lesser, or the infinite bar on your keyboard to playback or pause the video. The blue pointer is called the ​ Playhead , ​and shows your position in the video. You tin can drag information technology left or right to scrub forward or backward in the clip.

Y'all can control playback with the keys ​ J , K ​and ​ L ​. J volition rewind, K volition break, and L volition play the clip frontward. Clicking J or 50 multiple times will speed upwardly playback forrard or backwards.

Creating a Sequence

Before you get-go editing, yous need to create a sequence. A sequence is a container for all of your edits. Sequences are organized and accessed in the Project pane and edited in the Timeline. Y'all tin can have multiple sequences in ane projection, or do all of your editing within one sequence, it just depends on how you lot piece of work.

To create a new sequence, navigate to the horizontal menu at the tiptop of the screen. Click File > New > Sequence . Alternatively, you can apply the shortcut Control + N on a Mac, or CTRL + Due north on a PC.

One time you lot've created the sequence, a ​ New Sequence ​ window will open. Here, you lot can choose settings for your project'southward sequence, which will be applied to the video you are creating.

You lot tin can modify settings here to lucifer the video format for the camera you used for this project. You then can save the changes as a custom setting to reuse afterward (this is helpful if you're repeatedly using the same video camera). For case, the master video photographic camera we use at Berkeley AMI is the ​Sony X70​.

In the ​ Sequence Presets ​ tab, navigate to the ​ XDCAMHD 422 ​ folder, under Available Presets. Within this binder, open up the 1080p folder, and select XDCAM HD422 1080p24 . This setting matches the resolution and frame rate nosotros use with the Sony x70 camera.

If you lot are shooting on a Nikon or Canon, you lot'll want to use the ​ Digital SLR ​ setting.

To create custom settings, open up the Settings tab, located to the right of the Sequence Presets tab. Click the Salve Preset button in the lesser left of the window. A new window will open up, prompting you to name your preset. Name the preset and click OK . Your preset volition be available in the Sequence Presets tab, within the Custom folder at the bottom of the list of Available Presets.

You tin can apply your custom preset for time to come projects where you are editing video from the aforementioned camera.

If you're unsure of the video settings on your camera, Premiere tin can automatically match the sequence settings for yous. Premiere Pro CC 2019 volition do this automatically when yous elevate a video prune from your Project pane into the Timeline.

Later, when you lot drag and drop a clip into the Timeline, a dialog box will appear asking if you want to ​ Change sequence to match the clip's settings ​. To exercise so, select ​ Change sequence settings , ​and the settings will be adjusted to lucifer those of your video prune.

NOTE: If you copy and paste a clip into the Timeline, you may not get this warning. It may only appear after you elevate a clip into the Timeline from the project window or source monitor.

Moving Clips to the Timeline

You tin can add a prune to a sequence in the Timeline past dragging it from Source pane on the top left of the screen, down to the Timeline pane on the lower correct. Alternatively, you tin can drag and drop video footage from the Project pane direct into the timeline.

Drag the clip to the V1 video track on the timeline and release.

If there is audio with the prune you're moving to the timeline, that volition automatically be added as ane or ii new tracks of audio located on A1 and A2 below the video track.

If necessary, you can drag ​ merely the audio portion ​ of a clip to the timeline. Drag the icon that looks like an sound waveform, which appears merely below the preview on the Source pane, to the audio tracks in the timeline.

You tin can likewise drag ​ only the video portion ​ (without audio) to the timeline. Grab the icons just beneath the preview on the Source pane that appears like a film strip, and drag information technology to the video rail of the timeline.

You tin also highlight a portion of the video every bit you preview information technology in the Source pane, to drag a selection into the timeline, rather than an entire video clip.

Click where you lot would like to brainstorm the selection using the blueish playhead. Choose the selection using the open up subclass tool {, or clicking I on your keyboard. Scrub forward in your video preview to your called endpoint and click the closed bracket tool }, or press O on your keyboard. The surface area yous have selected volition be highlighted in the Source pane. Drag and drib the pick into the Timeline pane to edit.

Working with the Timeline

The timeline is where you will practice your editing and build your final video.

Video clips appear every bit horizontal bars in the timeline. Those in the upper half (Lines marked V1, V2, V3 etc.) are video content. Those in the lower half (A1, A2, A3 etc) are audio content.

The thin vertical bluish line is the playhead, and information technology shows your position in the timeline. When the playhead is over a video clip, the video will appear in the plan pane above. If you have multiple tracks or clips in the timeline, the playhead volition view them from the ​acme-down​. For example, 1 video runway will cover another. Think of all your tracks as if they're stacked up, and the playhead is viewing them from above.

Y'all tin only view the top video clip in the Program pane.

You can move the playhead by dragging it right or left, or you tin press the spacebar on your keyboard and utilise the keys ​ J,One thousand, and L ​ to navigate. They play backwards, pause, and frontwards, respectively.

You can also zoom in or out in fourth dimension on the timeline using the ​ + and – ​keys, or by clicking and dragging the circles on the horizontal bar nether the timeline from left to right. Zooming in and out on the prune allows you to view the seconds or minutes more than closely, and edit your footage more precisely.

Zoomed Out:

Zoomed In: This is the aforementioned prune equally above, but we're seeing simply a few seconds of it below.

Editing Clips in the Timeline

Yous tin can move video clips effectually in the timeline by clicking and dragging them upwardly, down, left or correct.

You can shorten clips by clicking on the edge of a prune and dragging information technology in. When y'all hover your cursor over the clip, a blood-red pointer will appear. Click and elevate inwards to shorten the prune to the desired length.

You can also lengthen a clip by clicking on the edge and dragging it out to the right.

If you lot take a prune with both video and audio tracks, and yous desire to change ane runway without affecting the other (such as deleting the sound rails), you lot tin unlink them.

To split up audio from video, click the Linked Selection button, which has an epitome of a mouse cursor over ii bars. When the button is highlighted blue, your audio and video are linked within the prune, when information technology'south white, the selection is unlinked. Alternatively, you can right click on the clip and select ​ Unlink ​ in the drop-down menu. Yous now can movement the video and audio rails clips independently of each other.

Past holding ​ Pick ​ or ​ Alt ​, you tin also make whatsoever of your edits simply target the clip you're clicking on. For instance, holding Alt volition let you click and simply select one audio track from a linked pair.

By default, the Timeline is set upwardly then that adjacent clips "snap" to each other, which makes it piece of cake to align them without having ane clip accidentally overlap the other or leaving empty space betwixt clips.

If needed, you can turn off snapping past clicking on the ​ Snap ​ icon, which is in the acme left of the Timeline, above the labels for the video tracks. The Snap icon looks similar a U-shaped magnet, and should be highlighted blue if it is on, and white when it is turned off. If you pass your mouse cursor over the icon the word ​ Snap ​ will announced. You can also click Southward on your keyboard to plough it on and off.

If y'all want to delete a clip on the Timeline, select the desired clip and press ​ Delete ​ on your keyboard.

Razor Tool for Splitting or Deleting Role of a Clip

If you want to split a video or audio prune in 2, or remove a segment in the middle of a clip (such every bit eliminating a sound gap in your sound), you can use the ​ Razor ​tool to dissever or slice out a segment of the clip.

The razor tools is ideal for editing longer clips, like interview segments. Yous can bring the unabridged clip into the timeline and use the razor tool to brand cuts to the clip.

It'south called a razor considering in the traditional picture show editing procedure a tape was literally sliced with a razor blade to remove unwanted pieces of the pic or rearrange segments of a flick.

To practice these cuts in Premiere Pro 2019, in the ​ Tool palette ​ click on the ​ Razor ​ tool, which looks similar a razor blade. For a shortcut, y'all can also printing C on your keyboard. Your cursor will change to a pocket-size razor icon while you lot are using this tool.

Click on the video clip at the signal where y'all want to cutting it. Or cutting the clip multiple times to create a segment in the eye that yous tin can remove. Then click on the ​ Selection ​ tool in the tool palette (the keyboard shortcut is the ​ V primal​) then you can select one of the segments to move or delete it. Delete the selection you've made by clicking it and pressing Delete on your keyboard.

Editing Clips in the Source Pane

Yous can make shorter selections from video clips while they are displayed in the Source pane to simplify editing before you lot bring clips into the timeline. Y'all tin can select only the all-time parts of the clip to bring into the timeline, then you can edit out whatever unnecessary footage.

In the Project pane, double click on the clip you want to edit to display it in the Source pane.

Play the clip using the play controls at the bottom of the Source pane, or past pressing the ​ spacebar ​ on your keyboard (press the spacebar once to play and then again to pause the clip).

You lot also tin can apply ​ J, K, L, and the spacebar on your keyboard to play the prune – L to speed up, J to rewind, K to pause, and the spacebar to play the clip at normal speed and pause.

Yous tin can as well scrub through a prune by clicking on the blue playhead only under the prune and dragging it to the right or left.

Select the part of the clip y'all want to movement to the timeline past setting in and out points on the clip while it's in the Source pane. Move the playhead to the point where you want your clip to start, and press I ​ on your keyboard, or clicking the { left bracket button, to set up the in indicate. At the betoken where you desire your clip to end, press ​ O on your keyboard, or click the } correct bracket button, to set the out point. You lot volition see a highlighted bluish area in the scrubber bar beneath the prune showing the selected area.

The in and out points can be adjusted by clicking and dragging on either edge of the blue section of the scrub bar.

One time you've ready the section of the clip y'all want in the In and Out points, y'all're prepare to copy the prune to the Timeline.

Overwrite and Insert Edits

If you want to put a new clip at a indicate in the timeline where information technology will overlap with an existing clip, you have ii options:

• Overwrite Edit ​: the portion of the new prune that overlaps the old clip volition replace the contents of the old clip. Thus you might have part of a video interview with someone that you want to overwrite with some "b-curl" footage of what the person is talking about.
•  ​ Insert Edit ​: the quondam prune will be split at the insertion point for the new clip and role of the quondam clip volition be moved to the correct on the Timeline to make room for the new clip. You might desire to carve up up a video clip of a scene past inserting a new scene in the heart of it.

You can do Overwrite or Insert edits by moving a new clip to the aforementioned rail in the Timeline equally the existing clip or past putting the new clip on a new video track higher up the existing clip.

If you do an Insert edit on a new runway, it will withal split the original clip on the track beneath. If you do an Overwrite edit on a new track, it will not alter the original clip on the track below, but you won't see that video because the new video is on a rail higher up it.

The ​ Overwrite edit ​ is the default in Premiere Pro 2019. When you drag a prune to the timeline, Premiere will automatically overwrite the overlapping portion of the existing clip with the new clip. This volition exist indicated past an pointer pointing downwardly.

To do an ​ Insert edit ​, press and concord down the ​ Control fundamental ​ on the Mac keyboard and then click and drag the clip to the timeline. That will split the existing clip on the Timeline and move the rest of the clip further to the correct on the timeline to make room for the new clip. This is indicated past an arrow pointing to the right.

In the Project pane, click to highlight the video clip you want to insert into the timeline. Below are the buttons for ​ Insert ​and ​ Overwrite ​. They also accept keyboard shortcuts: ​ , ​ and ​ .

If you lot use the keyboard shortcuts or the buttons, Premiere Pro 2019 will place the clip where your playhead (the vertical blue line) is located in your timeline.

Track Targeting

You can control where clips become when you add them from the source monitor, or when you lot copy and paste them.

The rows with blue highlighted messages, to the left side of the Timeline pane, command where video clips are placed. The far left side refers to what is in your source window. It'due south chosen source targeting.

The below epitome is saying I have a clip loaded that has one video track and two audio tracks, and that if I elevate it into the timeline, information technology would be placed on video runway V1 and audio tracks A1 and A2. You can move these targets around to change where clips will be placed.

In the beneath prototype yous can come across that the source targeting has been moved to video rail V3 and audio tracks A3 and A4. When clips are added from the source window, this is where they volition be placed.

The right column of highlighted boxes is as well "targeting," but specifically for when you copy and paste clips. This is chosen Runway Targeting. Then if yous copy a clip, past default it volition paste into video runway V1, merely you could modify that past clicking the highlighted video and audio tracks to turn targeting on or off.

By default, clips will paste into the innermost targeted track. So right now, if I copied and pasted a clip, it would appear in video rails V3 and audio tracks A3 and A4.

Working with Multiple Tracks

By default, Premiere Pro 2019 provides three tracks of video and six tracks of audio in the timeline. Y'all can create additional tracks by dragging clips above or beneath the outermost tracks.

You can also create additional tracks in the horizontal carte du jour at the top of the screen. Click ​ Sequence ​ > ​ Add Tracks.

A new window volition announced called Add Tracks . Enter the number of video and audio tracks you would similar to add, and choose where they will be placed. Click OK to add the tracks.

If yous have multiple tracks of video, whatsoever video is on the top track in the timeline will be shown when the sequence is played, and whatsoever other video clips underneath will not be seen.

If you have multiple audio tracks then all the sound will play simultaneously no matter which is above or below the others on the timeline.

To hide the video from a particular track in the timeline:

• Turn off the video for a item track in the timeline past clicking on the ​ centre ​ icon push to the far left of the rail to hide it. The middle icon is labeled Toggle Track Output, when you hover over information technology. Afterward clicking the eye icon, it will be highlighted blue with a cross through information technology. Click it again to view the footage on the track.
  

To turn off audio for a particular rails in the timeline:

• Turn off the audio for a particular runway in the timeline by clicking on the ​ M ​ button to the far left of the rails. The push button will turn green when the track is muted.
• To only play the audio from one specific track, click the ​ S ​ icon (for Solo). The button will plough xanthous when the track is "Soloed."

Markers

You can prepare markers on clips in the Source, Timeline or Program panes to help keep track of clips when editing video and audio.

The marker creates a snap-point on a clip or the timeline that the playhead volition lock onto.

This can be helpful when you're editing audio and y'all want a video track to begin on the downbeat of a song. You tin can set a marker during audio editing at the downbeat so you so can position a video clip to begin at precisely that point.

Yous create a marker in a prune in the Source, Timeline or Sequence panes by moving the playhead to the desired indicate on the clip and pressing the ​ M primal . ​The marker volition appear as a tiny green icon merely above the playhead.

To delete a mark right click on information technology and select ​ Clear Selected Marker ​ in the drop-down carte.

When using multiple markers, it can be helpful to change the color of a marker and requite information technology a name. To edit, right click on the selected marker, and choose Edit Marking… from the dropdown card. You can change the name and colour of the marker in the window that opens, and click OK .

Audio

Audio tracks, both those associated with your video or independent tracks that are just audio, are displayed below the video tracks on your timeline.

Adjusting Volume for an Individual Clip

To adjust the audio levels for a track, first click and drag on the edge of the runway to aggrandize it, or click ​Option/Alt + = ​ until a line appears in the eye of the track.

The waveform is a visual representation of your audio that shows it's loftier and depression points. In Premiere, there is a horizontal line through the waveform that represents the base sound level. You can drag this line up or down to arrange the volume of the clip. You tin't boost the sound level very much, but you lot tin can reduce it to negative infinity (which essentially mutes it).

Adjusting Volume at Multiple Points in a Prune

You also can raise or lower the audio at multiple points inside a clip to create fade ins and fade outs with your sound.

Yous tin create keyframes by holding downwards the ​ Command ​ key on the Mac keyboard while clicking on the white audio level line with your cursor. Do this at the points where you want the audio to change.

Another way to practice add keyframes is by selecting the Pen from the tool palette, and clicking on the white line.

When you move your cursor over a keyframe you'll discover a little diamond icon announced to the lower right of the cursor. This indicates you can change the sound level by clicking, holding down your mouse and dragging the keyframe higher to increase the audio or lower to decrease sound.

The audio level line will change appropriately. If the sound level line slopes upwardly from 1 keyframe to the next, the audio will fade in. If the audio level line slopes down from one keyframe to the next, the audio will fade out.

You lot also tin can drag a keyframe to the left or correct to adjust where fade ins and fade outs begin and cease.

To delete a keyframe, select information technology and printing ​ Delete on your keyboard​.

Transitions

To add a transition betwixt clips, similar a cross dissolve (so the commencement clip gradually fades out equally a second clip fades in) go to the ​ Effects tab within the ​ Project ​ pane​. Open the ​ Video Transitions ​ binder to admission a set of folders with a number of different transitions you tin apply.

One of the almost commonly used transitions is the cross dissolve. Open the ​ Dissolve ​ folder and you'll encounter the ​ Cross Dissolve ​ transition listed in that location. You lot can as well use the search bar to locate a specific transition you want to use.

To add the transition between ii clips in your timeline, position your playhead betwixt the clips, then select the transition you lot want to employ. Click and drag the transition from the binder to the timeline, and release it when it's positioned between the two clips.

The transition is shown as a greyness bar connecting the clips.

A faster way to add a cross dissolve between 2 clips is to utilize a keyboard shortcut. Click the edit signal betwixt the two clips so information technology is highlighted red, and so press Shift + D key​ on your keyboard. The Cantankerous Dissolve transition will be added here, as well equally Constant Power, which fades in and out audio betwixt clips. You can remove any of these elements by clicking the grayness bar and pressing Delete on your keyboard.

For the aforementioned effect, you can also correct click, and select Apply Default Transitions. Premiere's default transition is Cantankerous Deliquesce.

Past default transitions are ane 2nd long. If you want to change the duration or move the transition slightly to the left or right, first zoom in on the timeline by pressing + on your keyboard .

Once zoomed in, yous can click on the border of the transition and drag to extend or shorten the transition. You tin can hold the Shift key to move one border of the transition at a time.

Titles and Text

Y'all can add titles and text to your sequence, such as a box with explanatory text or a "lower 3rd" toward the bottom of a clip to identify the person in the video.

Showtime, position your playhead over the guess area in your Timeline sequence where you want the title to get-go.

Select the Text tool from the toolbar (shortcut ​ T ​).

With the text tool selected, y'all tin drag and depict a text box in the Program window (upper correct) and first typing. The title volition appear as a clip in the timeline, which you can extend or move simply like video footage.

You tin can switch dorsum to the pointer tool (shortcut Five ) to move the title around the image, or move it on the timeline. Double click the text box to switch back to the text tool to edit the contents.

To edit the titles in-depth, open the Effect Controls tab in the Source pane (tiptop left). Here you can suit font, size, style, etc.

To alter the colour of the text, click on the colored foursquare chosen Make full. The text color is set to white by default.

A title clip tin contain multiple pieces of text. With the title selected in the timeline, you can employ the Type key to make new text boxes.

You can add shapes to a championship by clicking and belongings on the Pen tool and selecting ane of the shape tools.

You tin can then use the shape tools (rectangle, ellipse, or pen) to create shapes in your motion graphics clip. Just like text, shapes tin also be edited in the motion graphics window, under Issue Controls.

If yous want to use the championship you've created in other Premiere Pro 2019 projects, right click on the title in the timeline and select Export Every bit Motion Graphics Template…

You can also create more complex templates in Adobe After Effects and import them into Premiere Pro 2019.

Effect Controls

There are many other tools you can use within Effect Controls. Some of the most commonly used effects are under the Video Effects subsection. You tin can add together movement to any graphics, or direct to your video footage. This is most oftentimes used to accommodate the Position and Scale of your video.

Conform the Calibration of your image (to zoom in or out) with the Scale slider. Expand the carrot to the left of Scale, and slide the circumvolve that appears beneath, forth the line to the left or right. This will zoom your image in or out.

Once you've adjusted for calibration, you'll want to reposition your paradigm. Located directly in a higher place Scale in the Video Effects tab, you tin can modify the number values to move your video to the left or right of the screen. Hover your cursor over the number in the left column to motion the image to the left or right. You tin can hover your cursor over the number in the right cavalcade to move the image up or down.

Color Correction

For basic color correction, search for Fast Color Corrector in the Effects search bar located to the right of your workspace. If the Furnishings search bar is not visible, select Furnishings from the vertical bar at the top of your workspace.

Once Fast Color Corrector is revealed, drag and place it on top of the video footage you lot want to alter. The Effect Controls window will open in the tiptop left Source window in your workspace. A large multi-colored circle will appear, where you can begin editing your color.

One of the most commonly needed color adjustments is White Residue. Select the dropper tool adjacent to the white box labeled White Residuum, and click on the whitest surface area in your video located in the superlative correct box of your workspace. Utilize your best judgement and adjust every bit necessary to accomplish the ideal color for your video.

Rendering

When you add an upshot like a transition or a title to your sequence, it may need to be rendered then it displays properly on your computer screen.

Rendering ways having the effect candy by the computer and so it is permanently added to your sequence of clips. If you lot run into reddish or xanthous lines above your Timeline, those are areas of your sequence that need to be rendered, unremarkably considering you accept added furnishings there.

Rendering your video equally you're editing can help with whatsoever playback issues you might be experiencing.

To render all the effects in your entire sequence, in the horizontal carte du jour at the acme select of the screen ​ Sequence > Return Entire Work Area ​. A window will open, showing the rendering progress, and your sequence will play automatically in one case rendering is complete.

The work expanse is the grey bar with the blue finish points that sits higher up all the tracks in your sequence. You can reposition the piece of work surface area, and hence the portion of your sequence being rendered, by dragging the blue end points to the left or right.

It will take some time for the rendering to be completed depending on how complex the effects were that yous added to your sequence.

Transferring Projects

When working in a collaborative situation, you can transfer an entire Premiere Pro CC 2019 projection from 1 team member to another.

This would allow ane person to work on a crude cut of a sequence, and then transfer the projection to a second person to practise the terminal edits.

Alternatively, one person could work on the showtime of a sequence, another person could piece of work on the end of a sequence, and then they could be merged into a single sequence.

To transfer a project, i​n the menu at the elevation of the screen, select File > Project Manager ​.

In the dialog box that appears make these selections:

1)  Select the checkbox next to the sequences yous want to share.

ii)  Nether Resulting Project, select the option ​ Collect Files and Re-create to New Location .

three)  Nether Options, select the the checkbox for ​ Exclude Unused Clips ​ (optional but recommended).

Note: Choosing this option will merely transfer the clips that are in a sequence, and any film file or clip that you have not used will not be transferred. This is recommended to reduce the overall file size of the projection y'all are sharing. If yous want to include every clip that you have imported into you projection folder, and so uncheck this box and everything will exist transferred.

four)  Check the 3 boxes labeled ​ Include Preview Files ​, ​ Include Sound Accommodate Files, ​and ​ Rename Media Files to Lucifer Clip Names.

five)  Nether Destination Path, click the Browse button to choose a destination to which this project and all its files will be copied. In most situations it will be an external difficult drive of the person with whom you are sharing the projection.

And then click ​ OK ​ to consummate the transfer of the project and its files.

The person receiving the files must then connect the external drive to their computer and open up the project. All the relevant media files will be in that new project.

If two people want to merge two sequences into one (similar the first half of a sequence and the cease), the person receiving the files over again must connect the external bulldoze to their computer. They and then must open up their existing project, select ​ File > Import ​, navigate to the projection they transferred from the other squad member, and click ​ Import .​ In the dialog box cheque ​ Import Selected Sequences ​.

A folder will appear in your Project pane with the name of the project you imported. Open that folder, click on the sequence within, and copy the clips into the timeline.

Finally, open the sequence in the existing project and re-create the clips from the imported sequence into the timeline.

Exporting

Before exporting, commencement you'll want to select the function of your timeline that y'all want to turn into a finished video. Yous tin select this expanse by marking an ​ In ​and ​ Out ​indicate in the timeline the same mode yous would in the source monitor (with the buttons on the toolbar, or with the ​ I ​and ​ O ​keys).

To export a sequence in Premiere Pro 2019 for viewing on the web, in the menu at the tiptop click on File > Export > Media ​.

That will bring upward an ​ Export Settings ​ box where you tin can select what in your sequence y'all desire to export and to adjust the settings for your exported picture show, like the ​ Format ​ and ​ Preset ​ settings.

Beginning review the ​ Source Range ​ selection in the lower left to make sure you're exporting all of the sequence that yous desire. Make sure information technology is gear up to ​ Entire Sequence ​ to export everything on your timeline.

Exist certain to check that you lot didn't go out any leftover clips on the finish of your timeline that you don't want included in your movie.

Nosotros recommend detail settings for exporting a video y'all can upload to YouTube and so embed on a spider web page:

Under Export Settings, click on the ​ Format ​ driblet-down carte and select ​ H.264.

Click on the ​ Preset ​ driblet-down menu and select ​ YouTube Hd 1080p Full Hard disk.

For maximum quality, under ​ Bitrate Settings, ​ select ​ VBR ii Pass ​ and prepare the Maximum Bitrate to around twice the Target Bitrate. ​Annotation: VBR ii will double your export fourth dimension, but will improve quality.

Target Bitrate is the setting that has the biggest effect on both file size and quality. For general settings, x is practiced for social media, 16 is recommended for YouTube, but if you've shot on a practiced camera and you want maximum quality, apply 25. Higher than that y'all probably won't notice the difference.

If you are having problem with the your videos colour looking dissimilar after exporting, effort checking the "render at maximum depth" box, but otherwise leave the rest of the settings alone.

Nether Export Settings, click the blueish highlighted file name located next to ​ Output Name, ​ to rename your video file and select a destination binder on your calculator where the video file will be exported (such as to an exports folder on your calculator).

Click the ​ Export ​ button at the lesser right.

Key Differences between Premiere Pro 2019 and 2020

If you've updated to Premiere Pro 14.0 or Artistic Cloud 2020, you may exist wondering about the changes fabricated between the updated version and the 2019 version.  A brief explanation of key differences as described by freelance video editor, Piotr Toczyński, What'due south New in Premiere Pro 2020?

Well-nigh this Tutorial

This tutorial was written for the Berkeley Avant-garde Media Establish past faculty and staff at the UC Berkeley Graduate School of Journalism.

Republishing Policy

This content ​ may not be republished ​ in print or digital class without express written permission from Berkeley Advanced Media Institute. Delight see our Content Redistribution Policy at multimedia.journalism.berkeley.edu/content_redistribution/.

© 2019 The Regents of the University of California

williamsarrierld.blogspot.com

Source: https://multimedia.journalism.berkeley.edu/tutorials/adobe-premiere-pro/

Share this post